Are you looking for the best air abrasion machine factories in China to enhance your surface processing needs? Let’s dive into a comparison of the top players, including Top Abrasive Co., QINGGONG MACHINERY, and Lucky Bridge Polishing Co., Ltd, to find the perfect fit for your business.
Air Abrasion Device – FDA Approved
Product Details: Dental air abrasion units use compressed air to project microscopic particles, typically aluminum oxide or glass beads, onto tooth surfaces for precise removal of decay. These units are often attached to a handpiece or can be self-contained. They operate within a pressure range of 40-100 psi and may include an optional water stream to enhance patient comfort. Various nozzle tip sizes and angles are available for different procedures.
Pros:
– Virtually painless experience, often eliminating the need for anesthesia due to…
– Leaves more of the healthy tooth tissue behind, reducing the risk of fracturing…
– Preferred for pediatric patients or individuals with minimal tooth decay, provid…
– No heat, pressure, vibration, or general discomfort during the procedure.
Cons:
– Procedures may take longer than with traditional drilling methods.
– Not recommended for deep cavities as it cannot reach into very deep crevices.
– The abrasive particles can cause sensitivity.
– Cannot be used to remove hard enamel or prepare crowns, onlays, and inlays.
Dental Air Abrasion Units
Product Details: Dental air abrasion units utilize compressed air to project microscopic particles of aluminum oxide onto tooth surfaces for precise removal of decay. These units are a minimally invasive alternative to traditional drilling methods, offering advanced technology for precise treatments. Key features include the use of air pressure to abrade targeted areas, and some units come with an additional water spray feature for enhanced patient comfort. The handpiece and nozzles are removable and can be easily sterilized, with various nozzle tip sizes and angles available[1][2][4].
Pros:
– Offers a virtually painless experience for patients, often eliminating the need…
– No noise, burning odor, vibration, heat, or pressure as in the case of a dental…
– Removes decay more efficiently and leaves most of the healthy tissues intact.
– No risk of micro-fracturing of the tooth; usually associated with drilling.
– Leaves the area relatively drier, resulting in better bonding of fillings and se…
– Increases the success rate of bonded orthodontic brackets.
Cons:
– The dentist must be careful while using the hand piece as the aluminum oxide par…
– Cannot be used for deep cavities touching the tooth pulp.
– Unable to remove large amalgam restorations or full coverage restorations effici…
Dental Air Abrasion Equipment
Product Details: Dental air abrasion units use compressed air to project microscopic particles, typically aluminum oxide, silica, or a baking soda mixture, onto tooth surfaces to remove decay and prepare teeth for restorations. These units operate like a mini sandblaster and are equipped with features such as suction to remove decay particles, adjustable air and water pressure, and easy-to-clean nozzles.
Pros:
– Generates no heat, pressure, or vibration, making the procedure virtually painle…
– Leaves more of the healthy tooth tissue behind compared to traditional drilling…
– Reduces the risk of fracturing and chipping the tooth, potentially extending the…
– Suitable for pediatric patients and individuals with minimal tooth decay, provid…
– Allows for treating multiple teeth in one visit, saving time and money.
Cons:
– Not recommended for deep cavities or those close to the tooth’s pulp.
– Cannot be used to remove hard enamel; traditional drilling is required in such c…
– May cause sensitivity due to the abrasive particles and compressed air.
– Not suitable for preparing crowns, onlays, or inlays.
Dental Air Abrasion Handpieces & Accessories
Air Abrasion Units – Henry Schein Dental
Product Details: Air abrasion units available at Henry Schein Dental include various models such as the PrepStart Air Abrasion Unit, AquaCare Single Air Abrasion Restorative Unit, and others. These units are designed for minimally invasive dentistry, allowing for the removal of tooth decay and preparation of cavities without the need for a dental drill. They feature adjustable powder and pressure settings, multiple tip sizes, and some models include a water spray feature for enhanced patient comfort. The handpieces and nozzles are removable and can be sterilized. These units are connected to an air line and do not require water plumbing[1][3][5].
Pros:
– No noise, burning odor, vibration, heat, or pressure, making it more comfortable…
– No need for local anesthesia.
– Removes decay more efficiently and leaves most of the healthy tissues intact.
– Less risk of micro-fracturing of the tooth.
– Leaves the area relatively drier, resulting in better bonding of fillings and se…
– Increases the success rate of bonded orthodontic brackets.
Cons:
– The dentist must be careful while using the hand piece as the aluminum oxide par…
– Cannot be used for deep cavities touching the tooth pulp.
– Unable to remove large amalgam restorations or full coverage restorations effici…
– Can cause some sensitivity in patients.
COXO Dental Aluminum Oxide Microblaster Abrasive …
Product Details: The COXO Dental Aluminum Oxide Microblaster is an air abrasion machine designed for dental use. It utilizes compressed air to spray fine abrasive particles at high speed, effective for removing stubborn adhesions. Key features include a recommend working pressure of 0.4MPa, a spray nozzle diameter of 1.0mm, and an input water pressure of 0.2MPa. The machine uses water mist to restrain sand powder from scattering and comes with various accessories such as O-rings, a powder bottle, tips, and filter cartridges. The abrasive powder can be chosen based on the task: 90 microns for removing adherents, 50 microns for bonding preparation,
and 27 microns for surface polishing.
Pros:
– Effectively removes stubborn adhesions using fine abrasive particles at high spe…
– Uses water mist to restrain sand powder from scattering, reducing mess.
– Versatile with different powder sizes for various dental tasks (90 microns, 50 m…
– Comes with multiple accessories including O-rings, powder bottle, tips, and filt…
– Free shipping over $49 and additional discounts available.
Cons:
– Requires specific working and input pressures (0.3~0.6MPa and 0.2MPa respectivel…
– Powder must be dry and loose; wet powder needs to be baked at 120℃ for half an h…
– Import duties, taxes, and charges are not included in the item price or shipping…
Los Angeles Abrasion Machine
Product Details: The Los Angeles Abrasion Machine is designed to measure the degradation of aggregates due to abrasion and impact. It features a closed hollow cylindrical steel drum rotating at 30-33 rpm, driven by a 1hp motor via an enclosed belt or chain drive. The drum includes a full-length steel shelf that lifts and drops the aggregate sample and abrasive charge, generating impact forces. The machine meets various standards including ASTM C131, ASTM C535, AASHTO T96, and EN 1097-2. It has electronic safety interlocks, a fully-enclosed cabinet to reduce noise and dust, and user controls mounted on the outside for easy operation.
The machine also includes an automatic counter for preset revolutions and overload protection[1][2][3].
Pros:
– Simple, reliable, and uncomplicated to operate
– Fully-enclosed cabinet reduces noise and dust
– Electronic safety interlocks ensure safe operation
– Meets multiple international standards (ASTM, AASHTO, EN)
– Automatic counter and overload protection for precise control
– Predictive of aggregate toughness and durability
Cons:
– Larger and more expensive compared to other abrasion tests like Micro-Deval
– Requires significant space due to its size
– Needs regular maintenance to ensure the longevity of the machine
– The test may not correlate directly with other abrasion tests like Micro-Deval
Aquacare Twin Air Abrasion Unit – Air-Polishing and …
TBTLAAT-II Los Angeles Abrasion Machine
Product Details: The Los Angeles Abrasion Machine, such as the TBTLAAT-II model, is designed for testing the resistance to abrasion of coarse aggregates. Key features include a rolled steel drum with an inner diameter of 711 mm and an internal length of 508 mm, rotating at a speed of 30-33 r/min. The machine is driven by an electric motor and equipped with an automatic counter for presetting the number of revolutions or duration. It requires a separate abrasive charge, typically 12 steel balls with a total mass of 5000 ± 50g. The machine is available with various power supply options, such as
220VAC, and can be upgraded with safety cabinets and noise reduction features.
Pros:
– High precision in testing coarse aggregates for abrasion resistance
– Automatic counter for presetting the number of revolutions or duration
– Option to upgrade with CE compliant safety cabinets and noise reduction features
– Multi-language support and high-resolution graphical display
– Durable construction with high stiffness welded steel frame
Cons:
– The machine is supplied without the abrasive charge, which must be ordered separ…
– Requires additional cost for safety cabinets and noise reduction upgrades
– Significant weight and size, making it less portable
– Noise generation without the noise reduction safety cabinet
Dental Air Abrasion Handpiece – View Cost, Unique …
Product Details: The Dental Air Abrasion Handpiece is designed for minimal invasive dentistry. It uses aluminum oxide particles propelled by compressed air to remove surface stains, food discoloration, plaque, and pigment spots from the tooth surface. The handpiece generates no heat, pressure, vibration, or general discomfort. It polishes and smoothens the tooth surface with its pressure spray. The product meets international standards with a 4-hole configuration and is compatible with Kavo, NSK PTL coupling systems. However, the standard kit does not include the coupling connector accessories.
Pros:
– Eliminates surface stains, food discoloration, plaque, and pigment spots without…
– Generates no heat, pressure, vibration, or general discomfort.
– Polishes and smoothens the tooth surface.
– Reduces the need for anesthesia, particularly for shallow cavities.
– Leaves more healthy tooth tissue behind.
– Reduces the risk of fracturing and chipping of the tooth.
Cons:
– Not recommended for deep cavities close to the tooth’s pulp.
– Cannot be used to remove hard enamel or prepare crowns, onlays, and inlays.
– May cause sensitivity due to the air and abrasive particles.
– Only suitable for removing small cavities on the outer or chewing surface of tee…
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| Air Abrasion Device – FDA Approved | Dental air abrasion units use compressed air to project microscopic particles, typically aluminum oxide or glass beads, onto tooth surfaces for precis… | – Virtually painless experience, often eliminating the need for anesthesia due to… – Leaves more of the healthy tooth tissue behind, reducing the ri… | – Procedures may take longer than with traditional drilling methods. – Not recommended for deep cavities as it cannot reach into very deep crevices. -… | www.treedental.com |
| Dental Air Abrasion Units | Dental air abrasion units utilize compressed air to project microscopic particles of aluminum oxide onto tooth surfaces for precise removal of decay…. | – Offers a virtually painless experience for patients, often eliminating the need… – No noise, burning odor, vibration, heat, or pressure as in the… | – The dentist must be careful while using the hand piece as the aluminum oxide par… – Cannot be used for deep cavities touching the tooth pulp. – Un… | www.scottsdental.com |
| Dental Air Abrasion Equipment | Dental air abrasion units use compressed air to project microscopic particles, typically aluminum oxide, silica, or a baking soda mixture, onto tooth… | – Generates no heat, pressure, or vibration, making the procedure virtually painle… – Leaves more of the healthy tooth tissue behind compared to tra… | – Not recommended for deep cavities or those close to the tooth’s pulp. – Cannot be used to remove hard enamel; traditional drilling is required in su… | www.scottsdental.com |
| Dental Air Abrasion Handpieces & Accessories | www.net32.com | |||
| Air Abrasion Units – Henry Schein Dental | Air abrasion units available at Henry Schein Dental include various models such as the PrepStart Air Abrasion Unit, AquaCare Single Air Abrasion Resto… | – No noise, burning odor, vibration, heat, or pressure, making it more comfortable… – No need for local anesthesia. – Removes decay more efficiently… | – The dentist must be careful while using the hand piece as the aluminum oxide par… – Cannot be used for deep cavities touching the tooth pulp. – Un… | www.henryschein.com |
| COXO Dental Aluminum Oxide Microblaster Abrasive … | The COXO Dental Aluminum Oxide Microblaster is an air abrasion machine designed for dental use. It utilizes compressed air to spray fine abrasive part… | – Effectively removes stubborn adhesions using fine abrasive particles at high spe… – Uses water mist to restrain sand powder from scattering, reduc… | – Requires specific working and input pressures (0.3~0.6MPa and 0.2MPa respectivel… – Powder must be dry and loose; wet powder needs to be baked at… | www.dentalsalemall.com |
| Los Angeles Abrasion Machine | The Los Angeles Abrasion Machine is designed to measure the degradation of aggregates due to abrasion and impact. It features a closed hollow cylindri… | – Simple, reliable, and uncomplicated to operate – Fully-enclosed cabinet reduces noise and dust – Electronic safety interlocks ensure safe operation… | – Larger and more expensive compared to other abrasion tests like Micro-Deval – Requires significant space due to its size – Needs regular maintenance… | controls-group.com |
| Aquacare Twin Air Abrasion Unit – Air-Polishing and … | www.dentrealstore.com | |||
| TBTLAAT-II Los Angeles Abrasion Machine | The Los Angeles Abrasion Machine, such as the TBTLAAT-II model, is designed for testing the resistance to abrasion of coarse aggregates. Key features… | – High precision in testing coarse aggregates for abrasion resistance – Automatic counter for presetting the number of revolutions or duration – Optio… | – The machine is supplied without the abrasive charge, which must be ordered separ… – Requires additional cost for safety cabinets and noise reducti… | tbttek.com |
| Dental Air Abrasion Handpiece – View Cost, Unique … | The Dental Air Abrasion Handpiece is designed for minimal invasive dentistry. It uses aluminum oxide particles propelled by compressed air to remove s… | – Eliminates surface stains, food discoloration, plaque, and pigment spots without… – Generates no heat, pressure, vibration, or general discomfort…. | – Not recommended for deep cavities close to the tooth’s pulp. – Cannot be used to remove hard enamel or prepare crowns, onlays, and inlays. – May cau… | www.dentallaboratorio.com |
Frequently Asked Questions (FAQs)
What is air abrasion and how is it used in dental procedures?
Air abrasion is a dental technique that involves using a fine spray of microscopic aluminum oxide particles to treat the surface of teeth or dental restorations. This process helps increase the retentiveness of the treated surface for subsequent adhesive procedures, such as bonding crowns, inlays, or orthodontic brackets. It micro-roughens the surface, improving the adhesive strength.
Where can I find reliable air abrasion machine manufacturers in China?
You can find reliable air abrasion machine manufacturers in China through platforms like Made-in-China.com. Here, you can browse through a list of verified suppliers, such as Foshan M&Y Medical Instrument Co., Ltd., Foshan Senda Medical Instrument Co., Ltd., and others. These manufacturers are audited and have verified business licenses, ensuring a certain level of quality and reliability.
What are the key features of air abrasion machines produced in China?
Air abrasion machines produced in China often feature high-quality materials, such as stainless steel and special wear-resistant metals, making them durable and ergonomic. They may also include advanced features like concurrent water spray to contain the aluminum oxide particles, reducing mess and enhancing convenience. For example, the RONDOflex 360 Air Abrasion System connects to the same coupling as an air turbine high-speed handpiece, making it user-friendly.
How do I ensure the quality and safety of air abrasion machines from Chinese manufacturers?
To ensure the quality and safety of air abrasion machines from Chinese manufacturers, look for suppliers with ISO certifications (e.g., ISO 9001, ISO 14001, ISO 13485) and verified business licenses. Additionally, check for customer reviews and feedback, as well as any certifications or endorsements from dental professionals. This will help you make an informed decision about the reliability and safety of the product.
What is the typical price range for air abrasion machines from Chinese manufacturers?
The price range for air abrasion machines from Chinese manufacturers can vary widely. You can expect to find machines priced between $40 to $400 per piece, depending on the features and quality. For instance, basic models might start at around $40-$65 per piece, while more advanced models with additional features could cost up to $320-$390 per piece. Always check the minimum order quantity (MOQ) and any additional costs involved.