Are you looking for the best dentafab printer factories in China? If so, you’re in the right place. In this article, we’ll compare some of the top Chinese manufacturers specializing in dental 3D printing technology, highlighting their strengths, innovations, and what sets them apart in the industry. Let’s dive into the world of UnionTech, TDLmould, and other leading companies that are revolutionizing dental care with their advanced 3D printing solutions. Here’s a closer look
DentaFab – 3D Printer & Resin
China Dentafab 3d Printer Manufacturer, Supplier | FastForm
Product Details: The Dentafab Sega 3D printer is a DLP (Digital Light Processing) 3D printer designed for dental applications. It features a build platform size of 120 mm x 68 mm, suitable for printing 1-3 full arch models. The printer uses 385nm / 405nm light source wavelength options and is known for its high speed, printing temporary crowns in 10-15 minutes and models in less than 30 minutes. It has a print speed of 90 mm/hour at 50 microns and a precision of up to 15 microns. The printer is controlled via a 7″ touch-screen and supports USB and WiFi connectivity.
Pros:
– Ultra-fast printing speed, capable of printing temporary crowns in 10-15 minutes…
– High accuracy and precision with a dimensional fidelity of up to 15 microns.
– Stable with over 99.9% success print ratio and a 20,000 hours projector warranty…
– Open system allowing the use of a large range of validated materials.
– Fast curing properties and efficient post-processing.
– Perfect stick technology that does not require a base layer, reducing resin usag…
Cons:
– Leveling the print bed can be annoying and requires loosening several screws.
– Software setup is not straightforward; slicing is done internally but requires e…
– Lack of cloud software and some quality of life features compared to other DLP p…
– Not ideal for high-volume printing due to the small build platform size.
DentaFab Sega 3D Printer
Product Details: The DentaFab Sega is a DLP (Digital Light Processing) 3D printer designed for dental applications. It features options to use 385nm or 405nm light source wavelengths. The build platform size is 120 mm x 68 mm, suitable for printing 1-3 full arch models. The printer is known for its speed, with temporary crowns printable in 10-15 minutes and models in less than 30 minutes. It has a medium setup difficulty and uses an open system with a large range of validated materials. Connectivity options include USB and WiFi.
Pros:
– High printing speed, with temporary crowns and models printed quickly
– Open system allowing a large range of validated materials
– Suitable for rapid prototyping and chairside printing
– User-friendly, especially for dental-specific applications
Cons:
– Limited build platform size, not suitable for high-volume production
– Lacks cloud software and advanced AI/CAD features
– No built-in heater for the resin tank/vat, requiring external heating for some r…
– Medium setup difficulty, requiring some technical knowledge
Sega 3D Printer – DentaFab
DentaFab gets CE Mark for tow 3D Printing Resins
RAPID MODEL
Product Details: The PowerResins BURN2 is a 3D printing resin designed for dental casting. It offers 100% ash-free burnout for chrome cobalt casting, with no investment cracks or expansion. It is suitable for lithium disilicate inlay, onlay, overlay, laminate, and veneer models. The resin is produced under ISO standards 13485:2016 and is compatible with validated DLP and LCD 3D printers. It has a flexural strength of 20.7 Mpa, flexural modulus of 472 Mpa, and tensile strength of 14.4 Mpa. The resin has a Shore Hardness of 70.5 D and a viscosity of 490-510 mPa.s at 23°C.
Pros:
– 100% ash-free burnout for dental casting
– No investment cracks or expansion
– High accuracy and perfect fitting margin lines
– No need for post UV curing after printing
– Suitable for lithium disilicate inlay, onlay, overlay, laminate, and veneer mode…
– Produced under ISO standards 13485:2016
Cons:
– Requires preheating to 37°C for optimal results if using a third-party printer w…
– May require additional steps for washing and drying after printing
– Storage conditions must be strictly followed to maintain resin quality
– Import taxes, duties, and fees apply for international orders
Dentafab Dental 3D Printer | Sega for sale from CM Medical
China Metal 3d Printer Cost Manufacturer, Supplier | FastForm
Product Details: The metal 3D printers from 3D FastForm, such as the FF-M140C and FF-M180D, utilize Selective Laser Melting (SLM) technology. These printers are designed for dental and other precision metal printing applications. Key specifications include print volumes of up to 140mm x 100mm, spot sizes ranging from 50-80 μm, and powder layer thicknesses of 0.02-0.15 mm. They feature advanced optical systems, self-developed software for automatic typesetting, and high-power lasers (up to 500W x2 for dual laser models)[3][5].
Pros:
– High precision and accuracy with spot sizes as small as 50-80 μm
– Ability to print complex parts with excellent material properties such as streng…
– Fast building capabilities with efficient powder utilization
– Advanced software for automatic typesetting and path planning
– Remote monitoring and strong stability features
Cons:
– High cost of ownership, with prices typically in the range of hundreds of thousa…
– Requires significant post-processing, including support structure removal and po…
– Needs skilled operators and isolated space on the manufacturing floor
– Expensive personal protective equipment (PPE) and facilities modifications may b…
– Risk of internal stresses and deformation during the printing and sintering proc…
3D printing—international magazine of …
DentaFab Sega 3D Printer Review
Comparison Table
| Company | Product Details | Pros | Cons | Website |
|---|---|---|---|---|
| DentaFab – 3D Printer & Resin | www.dentafab.com | |||
| China Dentafab 3d Printer Manufacturer, Supplier | FastForm | The Dentafab Sega 3D printer is a DLP (Digital Light Processing) 3D printer designed for dental applications. It features a build platform size of 120… | – Ultra-fast printing speed, capable of printing temporary crowns in 10-15 minutes… – High accuracy and precision with a dimensional fidelity of up… | – Leveling the print bed can be annoying and requires loosening several screws. – Software setup is not straightforward; slicing is done internally bu… |
| DentaFab Sega 3D Printer | The DentaFab Sega is a DLP (Digital Light Processing) 3D printer designed for dental applications. It features options to use 385nm or 405nm light sou… | – High printing speed, with temporary crowns and models printed quickly – Open system allowing a large range of validated materials – Suitable for rap… | – Limited build platform size, not suitable for high-volume production – Lacks cloud software and advanced AI/CAD features – No built-in heater for th… | voxeldental.com |
| Sega 3D Printer – DentaFab | www.dentafab.com | |||
| DentaFab gets CE Mark for tow 3D Printing Resins | 3dadept.com | |||
| RAPID MODEL | The PowerResins BURN2 is a 3D printing resin designed for dental casting. It offers 100% ash-free burnout for chrome cobalt casting, with no investmen… | – 100% ash-free burnout for dental casting – No investment cracks or expansion – High accuracy and perfect fitting margin lines – No need for post UV… | – Requires preheating to 37°C for optimal results if using a third-party printer w… – May require additional steps for washing and drying after prin… | asia.powerresins.com |
| Dentafab Dental 3D Printer | Sega for sale from CM Medical | |||
| China Metal 3d Printer Cost Manufacturer, Supplier | FastForm | The metal 3D printers from 3D FastForm, such as the FF-M140C and FF-M180D, utilize Selective Laser Melting (SLM) technology. These printers are design… | – High precision and accuracy with spot sizes as small as 50-80 μm – Ability to print complex parts with excellent material properties such as streng…. | – High cost of ownership, with prices typically in the range of hundreds of thousa… – Requires significant post-processing, including support struct… |
| 3D printing—international magazine of … | epaper.dental-tribune.com | |||
| DentaFab Sega 3D Printer Review | instituteofdigitaldentistry.com |
Frequently Asked Questions (FAQs)
Frequently Asked Questions About DentaFab Printers
What is the DentaFab Sega 3D printer, and what makes it unique?
The DentaFab Sega 3D printer is a specialized device designed for dental laboratories and clinics. It stands out for its exceptional speed, allowing you to print temporary crowns in as little as 10-15 minutes at 100 micron layers. This printer uses Digital Light Processing (DLP) technology and is known for its precision and the ability to integrate seamlessly into your existing workflow.
Where is the DentaFab company based, and what is its background?
DentaFab is based in Istanbul, Turkey, and was founded in 2013. The company focuses on providing 3D printing solutions specifically for the dental industry, including 3D printers and 3D printing resin materials. Their flagship product, the DentaFab Sega, is tailored to meet the unique needs of dental professionals.
What software does the DentaFab Sega use, and how do you prepare prints?
The DentaFab Sega uses internal slicing within the printer itself, but you need to prepare your prints using external software. The manufacturer recommends using CHITUBOX to support your prints before exporting them as STL files, which are then uploaded to the printer via USB. While CHITUBOX is user-friendly, it lacks some dental-specific features.
What are the material options and availability for the DentaFab Sega?
The DentaFab Sega is an open system, allowing you to use a wide range of dental resins. You can upload print settings for these resins via Wi-Fi, and DentaFab also offers to work out the print settings for any resin you send to their HQ. They have a variety of dental resins available through their sister company, PowerResins.
How much does the DentaFab Sega cost, and what is included in the price?
The DentaFab Sega costs $9,000 USD. This price includes free remote setup and training, a finish kit for post-processing, eight resin tanks, and 2 kg of silicone A+B material to renew the resin tanks. The ongoing running costs are relatively low, making it a cost-effective investment for dental professionals.